2010 STADIUM DRIFT SCRUTINEERING / SAFETY INSPECTION REQUIREMENTS
JAN 2010 EDITION
CONDITION OF ENTRY
1/-----PRIOR TO ANY EVENT ALL VEHICLES MUST PASS A SAFETY
INSPECTION
WHICH WILL BE CARRIED OUT BY A
QUALIFIED/APPROVED RACELINE
(STADIUM DRIFT OFFICIAL)-----
ONCE PASSED EACH VEVICLE WILL HAVE AN
APPROVAL STICKER , SIGNED & DATED
ATTACHED TO THE L/H SIDE OF THE
WINDSCREEN
2/-----NO VEHICLE WILL BE PERMITTED TO ENTER THE TRACK OR TAKE
PART IN
THE EVENT UNTIL THE
APPROVAL STICKER HAS BEEN ATTACHED.
3/-----ALL VEHICLES MUST BE PRESENTED READY TO COMPETE WITH
BONNET &
BOOT OPEN & THE DRIVER
WITH THE VEHICLE WITH ALL HIS DRIVING &
SAFETY GEAR.
VEHICLE REQUIREMENTS
1/-----ALL PRO & L2 CLASS VEHICLES MUST HAVE AN
APPROVED/WORKING FIRE
EXTINGUISHER SECURELY
ATTACHED & WITHIN EASY REACH OF THE
DRIVER.
2/-----NO FLUID LEAKS OF ANY TYPE
3/-----SEATS TO BE BOLTED IN SECURELY WITH 4 BOLTS (MIN) &
SEAT BELTS TO
BE IN GOOD WORKING
CONDITION WITH NO VISIBLE DAMAGE OR DEFECT.
4/-----BATTERIES MUST BE CLAMPED OR BOLTED IN SECURELY WITH A
PLASTIC
COVER OVER THE
POSITIVE TERMINAL, BOTH TERMINALS TO BE GOOD
CONDITION , BATTERY MUST BE
CAPABLE OF STARTING THE VEHICLE
WITHOUT JUMP
ASSISTANCE.
5/-----IF THE REAR SEAT HAS BEEN REMOVED THE BOOT MUST BE
ADEQUATELY
SEALED FROM THE DRIVERS
COMPARTMENT.
6/-----THE CLUTCH & BRAKE MASTER CYLINDER MUST BE COVERED BY
ABSORBENT MATERIAL.
7/-----WHEEL SPACERS MUST BE APPROVED, USEING WASHERS AS SPACERS
IS
NOT ACCEPTABLE.
8/-----ALL WHEEL NUTS & STUDS MUST BE FITTED.
9/-----BOOTS MUST BE FITTED WITH A WORKING LOCKING SYSTEM WHICH
IS ABLE
TO BE OPENED FROM
OUTSIDE THE VEHICLE.
10/-----BONNETS MUST BE CORRECTLY FITTED WITH WORKING SAFETY
CATCH
PLUS PINS OR
STRAPS
11/----METAL VALVE CAPS MUST BE FITTED
12/----ALL WHEEL NUT COVERS MUST BE REMOVED.
13/----ALL VEHICLES MUST BE WELL PRESENTED WITH BODY PANELS
& BARS
SECURELY ATTACHED,
MULTIPLE COLOURED PANELS & PATCH PRIMER IS
NOT ACCEPTABLE.
14/----ALL PRO DRIVERS MUST WEAR APPROVED DRIVING SUITS, L2
DRIVERS
MUST WEAR DRIVING
SUITS OR SUITABLE OVERALLS OF THE DRIVERS SIZE.
15/----HELMETS MEETING AUST SAFETY STANDARDS MUST BE WORN
16/----COVERED SHOES OR BOOTS MUST BE WORN.
17/----DRIFT SCHOOL, NEW DRIVERS OR RIDE DRIVERS MUST WEAR
CLOTHING
WHICH PROVIDES ANKLE
TO NECK TO WRIST COVER.
18/----ALL SAFETY GEAR & HELMETS MUST BE PRESENTED AT SAFETY
INSPECTION.
19/----NUMBERS MUST BE A MIN OF 150 HIGH & FITTED TO BOTH
SIDE REAR
PASSENGER WINDOWS AS
WELL AS THE LOWER LEFT OF THE
WINDSCREEN. PREFERRED
COLOUR IS WHITE OR YELLOW, FLURO IS OK.
(REMEMBER--NO NUMBER = NO POINTS SCORED)
20/----TYRES----REF TYRE RULE IN GENERAL REGS
21/----OIL CATCH TANKS MUST BE FITTED & ATTACHED SECURELY.
SHOULD YOU HAVE ANY QUESTIONS PLEASE CALL IAN OR TIM on 07 55
378255
